Honeywell Centraline FALCON, User Manual, Page: 63 / 276

USER GUIDE FALCON
59 EN2Z-0962GE51 R0715
IO Configuration
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing x
Equivalent
The I/O configuration is not visible in the Excel Web HTML Interface, but only in
CARE.
Analog input and output points must be configured prior to their assignment to a
particular terminal on a module in CARE. This is done by selecting the appropriate
configuration such as NTC, PT100 Type F, etc., for the datapoint. The assignment
of the configuration results in the automatic setting of the configuration properties for
the datapoint.
For pull-up resistor handling, please refer to the "Pull-Up Resistor Handling" section.
Is Alarm Condition
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing x x
Equivalent In Alarm
Defines the state which enables the ´Alarm` flag. If enabled, the alarm text of the
corresponding transition event is displayed.
Example:
State Text Is Alarm Condition Alarm Text Display
1 NO NO
2 YES YES
See also "In Alarm" section.
Is Fault Condition
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing x x
Equivalent Fault
Defines the state which enables the ´Fault` flag. If enabled, the fault text of the
corresponding transition event is displayed.
Example:
State Text Is Fault Condition Alarm Text Display
1 NO NO
2 YES YES
See also "Fault" section.