Honeywell Centraline FALCON, User Manual, Page: 50 / 276

FALCON USER GUIDE
EN2Z-0962GE51 R0715 46
HTML interface only. It cannot be edited at all and there is no
equivalent.
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing
Equivalent
In some exceptions, remarks in quotation marks are added. In
the following table of the
Engineering Unit property description,
"assigned to value" means that the engineering unit is not
available as property but is assigned to the current value of the
datapoint.
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing "assigned to value" X
Equivalent
Ackn. (Acknowledged Transitions)
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing
Equivalent
Shows whether a transition has been acknowledged or not. By default, each
transition will be acknowledged by the Excel Web controller and the Ackn. Property
is checked in the Excel Web HTML Interface. On the EBI central, transitions can be
set to be asked for acknowledgement by the operator manually.
Active / Inactive Text
Datapoint Type AI AO AV BI BO BV MI MO MV PC RI RO
User Interface HTML Interface CARE
Editing - X
Equivalent Auto, Manual
To binary points, texts can be assigned in CARE to display the corresponding active
or inactive state of the point in the Excel Web HTML Interface. The texts include
active/inactive (passive) descriptions with unit, and number of states.
Example: Active / Inactive text assigned to binary output for switching a pump.
Unit Number of states State (0) State (1)
1 2 OFF ON
2 2 Stopped Running
The actual state is displayed as present value in the Excel Web HTML Interface.
See also "Auto" and "Manual" sections.
Alarm Delay