FALCON
USER GUIDE
EN2Z-0962GE51 R0715
188
Enter alarm delay in s into the
Alarm Delay
field.
•
State Text, Is Alarm Condition, Is Fault Condition (applies to MI and MV
datapoint type only)
For Multi-State Inputs and Multi-State Value datapoints you can define the
states which represent and set off an ´Off-Normal` and/or a ´Fault` event.
Each state can be set for setting off an ´To-Off-Normal` and/or a ´Fault` event.
For each state, check the conditions by clicking the corresponding radio button.
2.
Click the SUBMIT button to save settings.
3.
To view /edit datapoint values, click on the
Values
tab (see "View / Edit Values"
section.
View / Edit Values
Procedure
1.
In the
Details
dialog box of the selected datapoint, select the
Values
tab.
Summary of Contents for Centraline FALCON
