Honeywell Centraline FALCON, User Manual, Page: 159 / 276

USER GUIDE FALCON
155 EN2Z-0962GE51 R0715
By default, all schedules will be displayed indicated by the asterisk. A blank
filter displays all schedules too. If any text without wildcards is entered, the filter
will search for an exact match. The search is case-sensitive.
3. To display specific schedules, enter the appropriate search text.
4. Click the GO Button to apply the filter.
All schedules matching the filter criteria will be displayed under Existing
Schedules . For each schedule its name, switched properties and the
description is displayed.
Schedules can be newly created, edited, copied and deleted.
5. To create a new schedule, click the NEW button.
6. To edit a schedule, click on the schedule name listed in the Schedule Name
column.
7. To copy a schedule, click the checkbox at the schedule name and click the
COPY button.
RESULT: The name of a copied schedule will be replaced with "Copy of
<source schedule name>".
After the successful copying we recommend to edit the schedule entries.
8. To delete a schedule, click the checkbox at the schedule name and click the
DELETE button. To delete all schedules, click the top checkbox in the title line
and click the DELETE button.
NOTE: Schedules are only displayed, if the read access level of the user is
equal to or higher than the read access level of the schedule.
Creating, editing, deleting and copying schedules is only possible if:
•
the user's access level is higher than the access level for
creating, editing, deleting and copying schedules defined in
the user administration. Otherwise the NEW, DELETE and
COPY buttons are not displayed.
•
the user´s write access level is equal to or higher than the
write access level of the individual schedule.
Create Schedule
Procedure 1. On the Schedules tab, click the NEW button.
RESULT:
The New / Edit Schedule dialog box displays.