K0022UGV1 12/01 Rev. C
ADEMCO 6150V & 6160V
Voice Remote Keypad
USER GUIDE
This document provides Operating Instructions for your Keypad’s voice features. Refer to your
security system User Guide for all other security system functions and operating procedures.
Message Center
The ADEMCO 6150V/6160V Keypads feature a
voice message center that lets you record and
playback one message.
•
The message can be up to 2.5-minutes long
•
The message remains in the Keypad’s
memory until a new message is recorded.
•
The volume control of the message is
adjustable.
•
Refer to the procedures below when using the
Message Center functions.
1
OFF
4
MAX
7
INSTANT
READY
2
AWAY
5
TEST
8
CODE
0
3
STAY
6
BYPASS
9
CHIME
#
ARMED
READY
6160
V
-00-005-
V
1
MESSAGE
MIC
RECORD
V
OLUME
PLAY
STATUS
V
OICE
FUNCTION
V
OLUME
KEY
V
OICE
KEY
STATUS
KEY
FUNCTION
KEY
DOWN
V
OLUME
PLAY KEY
AND
UP
V
OLUME
RECORD
KEY
SPEAKER
LCD
DISPLAY
MICROPHONE
LEDs
To record a message:
Press [#] FU
N
CTIO
N
+ [0] VOICE + [1] RECORD keys.
The red MESSAGE indicator will light, indicating record in progress.
Note
: A message cannot be recorded during the Exit Delay period.
To end recording:
Press [1] RECORD key.
The red MESSAGE LED will flash indicating a message waiting to be
played. After the message is played once the MESSAGE LED will go
out.
To play a message:
Press [#] FU
N
CTIO
N
+ [0] VOICE + [3] PLAY keys.
The recorded message plays and the red MESSAGE LED turns off. The
recorded message will remain in memory until a new message is
recorded.
To adjust the volume:
Press [#] FU
N
CTIO
N
+ [0] VOICE + [2] VOLUME keys,
then press the desired volume control key [3]
↑
(up) or [6]
↓
(down).
Note:
•
Adjusting message volume also adjusts status volume. Volume
cannot be adjusted while playing a message.
•
Each time you enter the command to adjust the volume, the word
“CHECK” will be heard to verify the current setting.
(Continued on Other Side)
