Honeywell A700, Hardware Reference Manual, Page: 90 / 334

NYI = Not Yet Implemented. These parameters should be considered unsupported, though they
can (with knowledge) be set via the CCI or advanced settings.
Message Format
Additional information added to barcode data
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Message format]
Registry Key
Default
Value
A730 A730x Description
MessageFormatSymbologyIdentifier 0x0
ü ü
Chooses which symbology identifier is
inserted before the barcode data.
0 = disabled,
1 = Code Mark,
2 = AIM format,
3 = User Defined.
Decoding Security
Decoding verification
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
Voice Device and Headset Hardware Reference Guide 68