Honeywell A700, Hardware Reference Manual, Page: 89 / 334

Registry Key
Default
Value
A730 A730x Description
IdTagActivation 0 X
ü
Enables the symbology.
IdTagCodeMark 0x2A X
ü
A single character inserted before the
bar code data to indicate the
symbology.
IdTagUDSI H3 X
ü
User-defined symbology identifier.
Range is 0-4 characters.
Han Xin Code
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Han Xin Code]
Registry Key
Default
Value
A730 A730x Description
HanXinCodeActivation 0 X
ü
Enables the symbology.
HanXinCodeCodeMark 0x2A X
ü
A single character inserted before the
bar code data to indicate the
symbology.
HanXinCodeUDSI D4 X
ü
User-defined symbology identifier.
Range is 0-4 characters.
Imager Generic
Imager generic parameters affect all symbologies.
Parameter support is identified as follows:
X = Parameter is supported and available via Device Profile settings.
N/A = Parameter is not supported on this device.
67 Voice Device and Headset Hardware Reference Guide