Honeywell A700, Hardware Reference Manual, Page: 65 / 334

Registry Key
Default
Value
A730 A730x Description
Code39StartStopTransmission 0x0
ü ü
Enables transmission of start/stop
characters.
Code39AcceptedStartCharacter 0x2
ü
X
Selects start character, where
1 = '$',
2 = '*', and
3 = '$' and '*'.
Code39FullASCIIConversion 0x0
ü ü
Enables extended character set
through the use of control characters,
where
0 = disabled and
1 = enabled (extended spec).
Code39UDSI B1
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
Code 128
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 128]
Registry Key
Default
Value
A730 A730x Description
Code128Activation 0x1
ü ü
Enables the standard Code 128
symbology.
ISBT128Activation 0x0
ü ü
Enables the International Society of
Blood Transfusion's variant of Code
128.
GS1-128Activation 0x1
ü ü
Enables the GS1 (formerly EAN)
variant of Code 128.
43 Voice Device and Headset Hardware Reference Guide