Honeywell A700, Hardware Reference Manual, Page: 133 / 334

5. Make sure the battery is firmly in place and cannot be removed without pressing the battery
release latches.
WARNING
Replace a battery only with another battery that has been authorized by Honeywell for the
product you are using. Use of an unqualified battery may present a risk of fire, explosion,
leakage, or other hazard. See also
Honeywell Battery Safety
Removing a Battery from an SRX2/SRX3 Wireless
Headset
IMPORTANT
Do not remove the battery from the SRX2 or SRX3 headset until the LED indicator on the
headset is off.
1. Power off the headset by pressing and holding the Power button on the electronic module
for one second.
2. Grasp the headset by the sides of the electronic module with your thumb and fingers on the
black battery latches.
111 Voice Device and Headset Hardware Reference Guide