Table
7
.
Ground
Level
Thermal
Capabilities
Mounting
Mounting Description
Minimum Air Flow Required to
Operate at 55°C (131°F)
Standard
Indoor Unit is mounted or bolted
directly to insulating surface. For
instance, onto a composite surface.
123 CFM
On Controlled Plate
Indoor Unit is mounted or bolted
directly to a thermally conductive
surface. For instance, actively
controlled cooling plate.
No Airflo
On Standoff
Indoor Unit is mounted or bolted with
a gap to an insulating surface. For
instance, vibration mounts. The gap
allows airflo
w u
nderneath the Indoor
Unit.
27.43 CFM
Page 3
8
1
8
Feb 2021
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
SMALL SATCOM