June 2018
Power Supply Module Kit # 51-52-33-129
1
ControlEdge HC900 Controller
Power Supply Module
Installation and Replacement
Controller Power Supply
900P01 - (current revision number)
900P24 - (current revision number)
Document Number
Form: 51-52-33-129
Effective Date: 06/2018
Supersedes: 11/2005
Summary
Enclosed is a new Power Supply module for your ControlEdge HC900
Controller.
It can be installed in a:
Standard Controller or Remote I/O Rack Assembly
– Figure 1
I/O Rack Assembly with Redundant Power
– Figure 2
(
Only available on 8 slot and 12 slot I/O Racks)
Redundant Controller Rack Assembly
– Figure 3
Never attempt to remove the Power Supply module from
the controller rack with power applied.
RIUP
Contents
The power supply module is supplied in a shipping container and
protective shipping materials. The container includes an appropriate
identification label that matches the label on the module. The Power
Supply module should be stored in the shipping container until ready for
installation.
Installation
Guidelines
The power supply module may only be inserted into a dedicated slot
location in the rack as shown in Figure 1, 2, or 3. The safety ground
connection of the field power source must be connected to the chassis
ground terminal. The power supply ground jumper also connects to the
chassis safety ground terminal. See Figure 4 or Figure 5.
WARNING
