Honeywell 145*g1D, User Manual

Page: 71 / 206

4 - 1
4
Input/Output Settings
Power Up Beeper
The scanner can be programmed to beep when it’s powered up. If you are using a cordless system, the base can also be pro-
grammed to beep when it is powered up. Scan the
Off bar code(s) if you don’t want a power up beep. Default = Power Up
Beeper On - Scanner.
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If you scan the Beep on BEL On bar code
below, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.
Trigger Click
To hear an audible click every time the scanner trigger is pressed, scan the Trigger Click On bar code below. Scan the Trigger
Click Off code if you don’t wish to hear the click. (This feature has no effect on serial or automatic triggering.) Default = Trigger
Click Off.
Power Up Beeper Off -
Scanner
* Power Up Beeper On -
Scanner
Power Up Beeper Off -
Cordless Base
* Power Up Beeper On -
Cordless Base
*Beep on BEL Off
Beep on BEL On
*Trigger Click Off