Honda WX15T, Manual

Page: 42 / 100

5-3
dummyhead dummyhead
FUEL SYSTEM
FUEL TANK REMOVAL/INSTALLATION
Place a suitable container under the carburetor.
Turn the fuel valve lever to the ON position.
Loosen the drain screw and drain the fuel.
Gasoline is highly flammable and explosive. You
can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
FUEL TANK
FUEL TANK TUBE
INSTALLATION:
Check for deterioration,
hardening, cracks, and
gasoline leakage.
Replace if necessary.
FUEL TANK CAP
INSTALLATION:
Make sure that the air vent hole is
clean.
FUEL FILTER
INSTALLATION:
Check to be sure the filter
is clean and undamaged
before installing.
RUBBER TANK
MOUNT A (2)
SETTING COLLAR (2)
TUBE CLIP
B10
RUBBER TANK MOUNT B
TUBE CLIP
B8
BOLT (6 x 20 mm) (2)
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
TUBE CLAMP (A type)