Honda WH15, Owner'S Manual

Page: 22 / 68

20
OPERATION
DISCHARGE HOSE INSTALLATION
Use a commercially available hose and hose connector. The hose clamp is
provided with the pump.
1. Verify that the hose coupling packing is in good condition.
2. Securely tighten the hose connector to the pump discharge port.
3. Install the discharge hose to the hose connector.
Use a hose clamp to securely fasten the discharge hose to prevent the
discharge hose from disconnecting from the hose connector under high
pressure.
It is best to use a short, large-diameter hose, because that will reduce fluid
friction and improve pump output. A long or small-diameter hose will increase
fluid friction and reduce pump output.
HOSE COUPLER
HOSE CLAMP RING
HOSE CLAMP
DISCHARGE HOSE
(Commercially available)
DISCHARGE PORT
HOSE COUPLING PACKING
HOSE CONNECTOR
(Commercially available)
31YH66120.book 20 ページ ２０２１年１月２０日 水曜日 午後８時３２分