Honda TRX400FA 2005 Page 147 Owner'S Manual Download

Page: 147 / 285

(1)

(2)

(5)

(1) seat lock lever
(2) seat
(3) front prongs

(4)

(3)

(4) hooks
(5) studs

138

Seat Removal

Servicing Your Honda

Saf ety Precautions

Refer to

on page

Press down on the seat until locks.

Installation

Slide the seat ( ) back and lift it.

Removal

Pull the seat lock lever ( ) at the right side of the seat.

The seat must be removed for the air cleaner, spark plug, battery and
fuse maintenance.

Insert the front prongs ( ) into the hooks ( ) on the frame and press
the studs ( ) into the grommets.

1.
2.

127

04/03/09 15:34:13 31HN7610_147

Summary of Contents for TRX400FA 2005






























































































































































































































































































Search results

Summary of Contents for TRX400FA 2005

Reviews:

Related manuals for TRX400FA 2005

Brands by name

Popular brands

Honda TRX400FA 2005, Owner'S Manual

Search results

Summary of Contents for TRX400FA 2005

Reviews:

Related manuals for TRX400FA 2005

Brands by name

Popular brands