Removing & Installing Body Components
Battery
#
Removal
Make sure the ignition switch is in the
(Off) position.
1.
Remove the left side cover.
2.
Pull the rubber sheet.
3.
Remove the fuse holder from the battery
holder.
4.
Remove the battery holder by removing
the battery holder bolt.
5.
Disconnect the negative
-
terminal from
the battery.
6.
Disconnect the positive
+
terminal from
the battery.
7.
Remove the battery taking care not to
drop the terminal nuts.
Maintenance
47
Continued
Rubber
sheet
Battery
holder
bolt
Terminal
nuts
Battery
Negative
terminal
Positive
terminal
Fuse holder
Battery holder