104
Tro
ub
les
ho
otin
g
Unlock the Ignition Switch in an Emergency
#
Set up to ID number input mode
1.
Press and hold the ignition switch for more
than 4 seconds.
u
The ignition switch ring and the Honda
SMART Key indicator flash for 5 seconds.
2.
Check the ID number on the ID tag.
3.
Press the ignition switch within 5 seconds
when the ignition switch ring and the
Honda SMART Key indicator are flashing.
u
The ignition switch ring and the Honda
SMART Key indicator stay lit, and the
buzzer rings. And then the ID number
input mode turns on.
#
ID number input
You can input your ID number by pressing the
ignition switch when the ignition switch is
(Off) or (Lock) position. Input the ID number
on the ID tag in order from the left in turn by
pressing the ignition switch.
The ID number is authenticated according to
the number of times the ignition switch is
pushed.
Push the ignition switch the desired number of
times within 5 seconds when the ignition
switch ring and the Honda SMART Key
indicator come on. After 5 seconds, the
buzzer rings once, the ignition switch ring and
the Honda SMART Key indicator go off and
come on again. This means that the inputted
number is fixed, and you can input the next
number.
ID number
