Honda SH300I 2006, Manual

Page: 266 / 511

DRIVE AND DRIVEN PULLEYS/CLUTCH
11-16
ASSEMBLY
• Apply specified quantity of grease to the inside
of the driven face and the guide grooves in the
movable driven face.
• Avoid getting grease or oil on the clutch shoe lin-
ings and driven pulley faces. Discard contami-
nated clutch shoes and clean contaminated
pulley faces with a high quality degreasing
agent.
DRIVEN PULLEY
Apply grease to new oil seal lips and outer surfaces,
and install them into the movable driven face.
Coat new O-rings with engine oil and install them
into grooves in the movable driven face.
GUIDE
ROLLER PINS
OIL SEAL
DRIVEN FACE
MOVABLE
DRIVEN FACE
OIL SEAL
DRIVEN FACE SPRING
SPRING COLLAR B
GUIDE
ROLLERS
O-RINGS
SEAL COLLAR
SPRING COLLAR A
SPRING SEAT
CLUTCH/DRIVEN
PULLEY NUT
DRIVE PLATE
RUBBER
DAMPERS
CLUTCH SHOES
E-CLIPS
SHOE
SPRINGS
SIDE PLATE
79 N·m (8.1 kgf·m,
58 lbf·ft)
OIL SEALS
O-RINGS