Honda SH300I 2006, Manual

Page: 213 / 511

ENGINE REMOVAL/INSTALLATION
8-9
Pack the new needle bearings with grease.
Drive the needle bearings into the engine hanger
bracket B with the marked side facing up until it is
fully seated, using the special tools.
ENGINE INSTALLATION
• Route the wires, hoses and cables properly (page
1-19).
TOOLS:
Driver
07749-0010000
Attachment, 24 x 26 mm 07746-0010700
Pilot, 20 mm 07746-0040500
ATTACHMENT/
PILOT
DRIVER
BEARING
SWING ROD
ENGINE HANGER BRACKET A
INNER COLLAR
DUST SEALS
NEEDLE BEARINGS
DISTANCE COLLAR
ENGINE PIVOT NUT
78 N·m (8.0 kgf·m, 58 lbf·ft)
FRAME PIVOT NUT
78 N·m (8.0 kgf·m, 58 lbf·ft)
ENGINE BRACKET NUT
64 N·m (6.5 kgf·m, 47 lbf·ft)
ENGINE HANGER BRACKET B
SWING ROD NUT (Upper)
42 N·m (4.3 kgf·m, 30 lbf·ft)
SWING ROD NUT (Lower)
52 N·m (5.3 kgf·m, 38 lbf·ft)