Unlock the Ignition Switch in an Emergency
#
Set up to ID number input mode
1.
Use the emergency key to open the seat.
2.
Remove the centre lower cover.
3.
Pull out the EM mode connector from the
battery holder.
4.
Remove the blue dummy coupler by
releasing the tab of the EM mode
connector while lifting the hook of the
blue dummy coupler.
5.
Check the ID number on the ID tag.
6.
Connect the EM mode coupler provided
in the tool kit to the EM mode connector.
u
Do not connect the EM mode coupler
except when in the ID number input
mode.
20180912132715_32K53L200_eng_BOOK Page 111 Wednesday, September 12 2018 13:33:26 JST
Troubleshooting
108
Tab
Hook
EM mode coupler
Blue dummy coupler
EM mode
connector
ID number
