Spark Plug
Changing Spark Plug
For the recommended spark plug, see
“Specifications.”
Use only the recommended type of spark
plug in the recommended heat range.
NOTICE
Using a spark plug with an improper heat range
can cause engine damage.
1.
Remove the maintenance lid.
2.
Disconnect the spark plug cap from the
spark plug.
3.
Clean any dirt from around the spark plug
base.
4.
Remove the spark plug using a suitable
spark plug wrench.
5.
Install the new spark plug. With the plug
washer attached, thread the spark plug in
by hand to prevent cross-threading.
20171012131102_31GGA6900_enu_BOOK Page 59 Thursday, October 12 2017 13:15:26 JST
Maintenance
56
Under step board
Spark plug cap