4.
Install a new bulb and parts in the reverse
order of removal.
u
Install the socket by aligning its " "
mark with the round projection on the
turn signal light lens. Then turn it
clockwise until the " " mark is aligned
with the triangular projection.
u
Use only the amber bulb.
#
Position Light Bulb
1.
Turn the socket counterclockwise and pull
it out.
2.
Pull the bulb out without turning it.
20160628185719_32K56E000_eng_BOOK Page 93 Tuesday, June 28 2016 18:59:29 JST
Electrical Trouble
u
Burned-out Light Bulb
Troubleshooting
90
Bulb
Socket
Triangular
projection
" " mark
Round
projection
