Honda Pioneer SXS500M 2019, Owner'S Manual, Page: 155 / 261

Servicing Your Honda 145
(cont’d)
Spark Plug
Use only the recommended type of spark plug in the recommended
heat range.
NOTICE
Using spark plugs with an improper heat range can cause engine
damage.
Refer to Safety Precautions on page 91.
1. Remove the seat back (page 107) and center rear panel (page 108).
2. Clean any dirt from around the spark plug base.
3. Disconnect the spark plug cap. Take care to avoid damaging the
spark plug wire when disconnecting the cap.
4. Using a spark plug wrench provided in the tool kit, remove the
spark plug.
5. Inspect the electrodes and center porcelain for deposits,
corrosion, or carbon fouling. If the corrosion or deposits are
heavy, replace the plug. Clean a carbon or wet-fouled plug with
a plug cleaner, if available, or a wire brush. Inspect the spark plug
electrodes for wear. The center electrode should have a flat tip
and sharp edges, and the side electrode should not be eroded. If
the electrodes and insulator tip appear unusually fouled or
burned, we suggest that you contact your dealer.
Spark Plug Recommendation
standard spark plug BKR5E-11 (NGK) or
K16PR-U11 (DENSO)
Spark Plug Inspection & Replacement
19 SXS500M-31HL56400.book 145 ページ ２０１８年７月３１日 火曜日 午後６時６分