Honda Pioneer SXS500M 2019, Owner'S Manual

Page: 186 / 261

Servicing Your Honda 176
Appearance Care
• After cleaning, inspect for damage, wear, and leaks (fuel, oil,
coolant and brake fluid).
Refer to Safety Precautions on page 91.
1. Rinse your Honda SXS thoroughly with cool water to remove
loose dirt.
2. Fill a bucket with cool water. Mix in a mild, neutral detergent,
such as dish washing liquid or a product made especially for
washing motorcycles or automobiles.
3. Wash your Honda SXS with a sponge or soft towel. As you wash,
check for heavy grime. If necessary, use a mild cleaner/degreaser
to remove the grime.
4. After washing, rinse your Honda SXS thoroughly with plenty of
clean water to remove any residue. Detergent residue can
corrode alloy parts.
5. Dry your Honda SXS with a chamois or a soft towel. Leaving
water on the surface to air dry can cause dulling and water spots.
As you dry, inspect for chips and scratches.
6. Start the engine and let it idle for several minutes. The engine
heat will help dry moist areas.
7. As a precaution, drive your Honda SXS at a slow speed and apply
the brakes several times. This will help dry the brakes and restore
normal braking performance.
The headlights' inside lens may fog temporarily after washing or
while driving in the rain. This does not impact the headlight function.
Any condensation inside the headlight should dissipate after a
few minutes of running the engine with the headlight(s) on.
However, if you see a large amount of water or ice accumulated
inside the lens(es), have your vehicle inspected by your dealer.
Washing Your Honda SXS with a Mild Detergent
19 SXS500M-31HL56400.book 176 ページ ２０１８年７月３１日 火曜日 午後６時６分