Honda Pioneer SXS500M 2019, Owner'S Manual, Page: 131 / 261

Servicing Your Honda 121
Engine Oil & Filter
(cont’d)
9. Remove the oil filter cover by removing the bolts. Let the
remaining oil drain out. Discard the oil filter in an approved
manner.
10. Coat new O-rings with engine oil and install them into each
groove in the filter cover and crank case.
11. Reposition the spring to the engine crankcase and install a new
oil filter with the rubber seal facing out, away from the engine.
You will see the “OUT-SIDE (TOWARD FILTER COVER)” mark on
the filter body, near the seal.
Use only the Honda Genuine oil filter or a filter of equivalent
quality specified for your model.
Using the wrong Honda filter or a non-Honda filter which is not
of equivalent quality may cause engine damage.
NOTICE
Improper installation of the oil filter can cause serious engine
damage.
bolts
oil filter
rubber seal
spring
oil filter cover
O-rings
bolt
19 SXS500M-31HL56400.book 121 ページ ２０１８年７月３１日 火曜日 午後６時６分