Honda NT1100A 2021 Manual Download Page 125

Page: 125 / 325

To turn off handle grip heater

Select the handle grip heater display of pop-

up information using the

function sel

switch.

Pull backward the

function lever several

times to select the handle grip heater off.

Do not use the handle grip heater with the

engine at idle for a long time. It may result in

a low (or dead) battery.

Maintains the selected level when the ignition

switch is turned to the (Off) position.

20210720104559_32MLF6000_eng_BOOK Page 125 Tuesday, July 20 2021 10:54:27 JST

Operation Guide

122

Handle Grip Heater

(Continued)

No indication (Off)

lowest temperature

highest temperature

Level 1

Level 2

Level 3

Level 4

Level 5

Pull backward the

function lever

Push forward the

function lever

Summary of Contents for NT1100A 2021






































































































































































































































































































































Search results

Summary of Contents for NT1100A 2021

Reviews:

Honda NT1100A 2021, Manual, Page: 125 / 325

Search results

Summary of Contents for NT1100A 2021

Reviews: