Honda NC750X Manual Download

Page: 57 / 183

Parking Brake

Parking brake lever and Release button

NC750XD

Be sure the parking brake is applied while

parking and warming up the engine.

Make sure the parking brake lever is

released before riding.

Locking

Pull the parking brake lever (

) back to lock

the rear wheel.

Be sure the release button pops out and

parking brake lever is not released.

The parking brake lock will not function if

the parking brake is not adjusted properly.

(

P.113

)

Unlocking

Release the parking brake lever by lightly

pulling in the lever (

) and pressing the

release button (

Before riding, check that the parking brake

indicator is turned off and make sure that

the parking brake is fully released so there is

no drag on the rear wheel.

Operation Guide

Parking brake lever

Release button

Summary of Contents for NC750X
























































































































































































Search results

Summary of Contents for NC750X

Reviews:

Related manuals for NC750X

Brands by name

Popular brands

Honda NC750X, Manual

Search results

Summary of Contents for NC750X

Reviews:

Related manuals for NC750X

Brands by name

Popular brands