Honda NC700 2012, Service Manual

Page: 662 / 773

19-23
dummyhead dummyhead
HYDRAULIC BRAKE
INSPECTION
Check the master cylinder [1] for scoring, scratches or
damage.
Check the master piston [2] for scoring, scratches or
damage.
Check the piston cups [3] for wear, deterioration or
damage.
Measure the master cylinder I.D.
Measure the master piston O.D.
REAR MASTER CYLINDER
REMOVAL/INSTALLATION
Drain the brake fluid from the hydraulic system:
– NC700X/S (page 19-8)
– NC700XA/XD/SA/SD (page 19-11)
Remove the muffler (page 2-32).
Remove the brake hose oil bolt [1], sealing washers [2]
and brake hose [3].
When removing the oil bolt, cover the end of the brake
hose to prevent contamination.
Remove the step holder mounting socket bolts [1] and
right step holder [2].
[1]
[2]
[3]
SERVICE LIMIT: 11.055 mm (0.4352 in)
SERVICE LIMIT: 10.945 mm (0.4309 in)
[2]
[3] [1]
[1] [2]