4 MENU SETTINGS
41
Setting the lawn mower operation
Homing setup
Home screen
J
[2.Lawn setup]
J
[4.Homing setup]
J
[1.Passage width]
You can set where the lawn mower moves in relation to
the boundary wire as it goes back to the docking station.
NOTE:
- This setting must be set to a value lower or equal
than the lowest width value that is set for any
mowing start point setting. For details on the
mowing start point settings, see “Mowing start
point” (
Passage width sample table
Setup level
Passage width
0
4 in. (10 cm)
1
10 in. (25 cm)
2
12 in. (30 cm)
3
14 in. (35 cm)
4
16 in. (40 cm)
5
18 in. (45 cm)
6
20 in. (50 cm)
7
24 in. (60 cm)
8
28 in. (70 cm)
9
32 in. (80 cm)
10
36 in. (90 cm)
- The
fi
eld strength varies depending on the length of the
boundary wire. The
fi
eld becomes weaker with a longer
boundary wire, and stronger with a shorter boundary wire.
- When the value is high (by avoiding moving along the same
path), you can avoid creating wheel tracks in the grass.
- The numerical values of this table are for reference
to return the lawn mower to the docking station
along a straight line.
- The numerical values may differ depending on the
actual conditions.
TIPS
Use as big a passage width as possible so to
reach the area quickly.
1
Enter a number setting.
2
Press the
H
button.
17:01 Fri
Passage width
Passage width
Max 1 0
Min
0
1
Menu screen
