3 PREP
ARA
TION
19
Setting up the lawn mower
2.
Setting the mowing start points
Through this setting, you can set the starting point to operate the lawn mower.
If you set the mowing start points and combine them with the settings of work timer, you can effectively mow
your lawn.
2-
1
Select [2.Mowing start points] and press the
H
button to con
fi
gure the mowing start points.
Mowing start points screen is displayed.
Setup wizard
1.Lawn layout
2.Mowing start points
3.Test start points
4.Work timer
2-
2
Select [Yes] or [No] to the question on the addition of
the start points and press the
H
button.
If you select [Yes], go to step 2-3.
If you select [No], no start point is added and the setup
wizard top screen is displayed.
NOTE:
- When selecting [No], [2.Mowing start points] and
[3.Test start points] are checked on the setup wizard
top screen.
- When selecting [No], the lawn mower will always
start mowing from the charging station.
Mowing start points
Are additional
start points needed?
Yes
No
2-
3
Select (Clockwise) or (Counter-clockwise), enter
the values of the distance from the docking station to
start cutting, and enter a percentage of the ratio which
the lawn mower operates.
Repeat the above operation for the starting points which you
want to con
fi
gure.
NOTE:
- You can con
fi
gure the following start points for each
model:
HRM310: 3 start points
HRM520: 5 start points
- Input the percentage of the ratio on the basis of all
the lawn sizes and the areas of each start point.
Even if the lawn mower starts work at the start point,
it works in areas other than the set area.
EX: HRM520
Mowing start points
4/7
Point / (0 - 2600 ft)
1 / _ _ _ ft _ _ _ %
2 / _ _ _ ft _ _ _ %
3 / _ _ _ ft _ _ _ %
4 / _ _ _ ft _ _ _ %
5 / _ _ _ ft _ _ _ %
NEXT
2-
4
Select [NEXT] and press the
H
button.
The con
fi
guration of mowing start points is completed.
The setup wizard top screen is displayed and [2.Mowing
start points] is checked.
NOTE:
- If you want to change the settings in this
con
fi
guration, select this menu again. You can
modify the settings through the setup wizard.
