14-28
10) Check the taper bearing (outer race) for damage before
removing it. Replace together with the inner race as a set if
necessary.
11) Remove the taper bearing (outer race) using the special
tools as shown.
TOOLS:
Remover weight
07741-0010201
Remover handle
07936-3710100
Bearing race puller
070PC-ZY3A100
12) Remove the forward bevel gear shim from the gear case.
Replace the forward bevel gear shim with a new one on
assembly.
13) Remove the oil slinger from the vertical shaft by expanding
the cut in the oil slinger with a screwdriver.
14) Check the taper roller bearing for noise, play and other
abnormality before removing it. Replace the inner race and
the outer race as a set if necessary.
15) Set a commercially available universal bearing puller on
the taper roller bearing (inner race), and install the vertical
shaft on the hydraulic press with the crankshaft installation
side toward up.
16) Remove the taper roller bearing from the vertical shaft
using the hydraulic press.
17) Remove the pinion gear shim from the vertical shaft.
Replace the pinion gear shim with a new one on assembly.
[1]
REMOVER
WEIGHT
07741-0010201
[2]
BEARING RACE
PULLER
070PC-ZY3A100
[5]
REMOVER HANDLE
07936-3710100
[4]
50 x 90 x 28 mm
TAPER BEARING
(OUTER RACE)
[3]
FORWARD
BEVEL
GEAR SHIM
[1]
OIL SLINGER
[2]
VERTICAL SHAFT
[3]
UNIVERSAL
BEARING PULLER
(Commercially
available)
[1]
30 x 62 x 40 mm
TAPER ROLLER
BEARING
[2]
VERTICAL SHAFT
