![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757484.webp)
14-17
4. PROPELLER SHAFT HOLDER
ASSEMBLY [*1]
a. REMOVAL/INSTALLATION
Remove the following parts.
– Propeller (P. 14-2)
– Gear case assembly (P. 14-3)
– Water pump/shift rod (P. 14-7)
1) Remove the two 10 mm washers and the two 10 x 40 mm
flange bolts.
2) Insert a screwdriver or equivalent tool into the recess in the
propeller shaft holder and remove the propeller shaft
holder assembly from the gear case.
Installation is the reverse order of removal.
[3]
10 mm WASHER (2)
[2] PROPELLER SHAFT
HOLDER ASSEMBLY
[2]
PROPELLER SHAFT
HOLDER ASSEMBLY
[1]
GEAR CASE ASSEMBLY
[1]
RECESS
10 x 40 (2)
34 N.m (3.5 kgf.m, 25 lbf.ft)