Honda legend, Owner'S Manual, Page: 62 / 611

CONTINUED
Place the child restraint system in
the desired back seating position.
Make sure the child restraint is
positioned well back in the seat-
back.
Route the belt through the
restraint according to the restraint
system maker’s instructions, then
insert the latch plate into the
buckle.
Push down the tab. Route the
shoulder part of the belt into the
slit at the side of the restraint. Grab the shoulder part of the belt
near the buckle, and pull up to
remove any slack from the lap part
of the belt. Remember, if the lap
part of the belt is not tight, the
child restraint system will not be
secure.
To remove slack, it may help to
put weight on the child restraint
system, or push on the back of the
restraint system while pulling up
on the belt.
1.
2.
3. 4.
Installing a Child Restraint System
Driver and Passenger Saf ety
57
TAB
09/01/28 17:39:29 32SMG631_062