Honda legend, Owner'S Manual, Page: 291 / 611

−
−
Selecting a different folder with the
TUNE bar also deactivates this
function.
The SCAN function
samples all tracks on the disc in the
order they are recorded on the disc
(all files in MP3 or WMA mode). To
activate the scan feature, press and
release the SCAN button. You will
see SCAN in the side display. You
will get a 10 second sampling of each
track/file on the disc. Press the
SCAN button again to get out of scan
mode and play the last track sampled.
Pressing either side of the SEEK/
SKIP bar also turns off the scan
feature.
You can also select the scan feature
on the audio display. Press the
AUDIO button to view the audio
display, then push down the selector
on the interface dial. Push the
selector to the right to select the
scan feature. You will see TRACK
SCAN blinking on the display. To
turn off this feature, push the
selector to the right again.
This feature,
when activated, samples the first file
of each folder for 10 seconds. To
scan a folder, press the SCAN button
repeatedly. You will see F-SCAN and
the folder number blinking on the
side display.
To listen to the rest of the folder,
press and hold the SCAN button
until you hear a beep. If you do not,
the system advances to the next
folder, plays 10 seconds of it, and
continues with the remaining folders
in the same way. When the system
has finished sampling the first file of
all folders, folder scan is cancelled,
and the last file played continues to
play.
In MP3 or WMA mode
SCAN
FOLDER SCAN
Features
Audio System (on vehicles with navigation system)
286
09/01/28 18:10:45 32SMG631_291