Home
/
Honda
/
legend
/
Owner'S Manual

Honda legend, Owner'S Manual, Page: 156 / 611

Share

Page: 156 / 611

Honda legend Owner'S Manual Download Page 156

Make any steering wheel
adjustments before you start driving.

Make sure you have securely
locked the steering wheel in place
by trying to move it up, down, in,
and out.

Move the steering wheel up or
down, and in or out, so it points
toward your chest, not toward
your face. Make sure you can see
the instrument panel gauges and
indicators.

Pull the lever under the steering
column all the way up.

Push the lever down to lock the
steering wheel in position.

1.

2.

3.

4.

Steering Wheel Adjustments

Instruments and Controls

151

Adjusting the steering wheel
position while driving may
cause you to lose control of
the vehicle and be seriously
injured in a crash.

Adjust the steering wheel
only when the vehicle is
stopped.

LEVER

09/01/28 17:52:24 32SMG631_156

«
...
154
155
156
157
158
...
»

Summary of Contents for legend




































































































































































































































































































































































































































































































































































































































Reviews:

No comments