Honda iGX440, Owner'S Manual

Page: 15 / 72

−
−
−
ENGLISH
ENGINE WILL
NOT START Possible Cause Correction
TECHNICAL INFORMATION
Serial Number Location
ENGINE LACKS
POWER Possible Cause Correction
TECHNICAL INFORMATION
ELECTRIC STARTER
(applicable types)
SERIAL NUMBER &
ENGINE TYPE LOCATION
SERIAL NUMBER &
ENGINE TYPE LOCATION
STANDARD TYPES
LOW PROFILE TYPES
ELECTRIC STARTER
(applicable types)
15
Record the engine serial
number, engine type, and date
of purchase in the space below.
You will need this information
when ordering parts and when
making technical or warranty
inquiries.
Battery
discharged.
Fuse burnt out.
Choke open.
(Recoil starter
types)
Engine switch
OFF.
Engine oil level
low.
Out of fuel.
Bad fuel; engine
stored without
treating or
draining
gasoline, or
refueled with
bad gasoline.
Spark plug faulty,
fouled, or
improperly
gapped.
Spark plug wet
with fuel
(flooded engine).
Fuel filter
restricted,
carburetor
malfunction,
ignition
malfunction,
valves stuck, etc.
Electric
starting
(applicable
types):
Check battery
and fuse.
Check control
positions.
Check engine
oil level.
Check fuel.
Remove and
inspect spark
plug.
Take engine to
an authorized
Honda
servicing
dealer, or refer
to shop
manual.
Check air filter.
Check fuel.
Take engine to
an authorized
Honda
servicing
dealer, or refer
to shop
manual.
Filter element(s)
restricted.
Bad fuel; engine
stored without
treating or
draining
gasoline, or
refueled with
bad gasoline.
Fuel filter
restricted,
carburetor
malfunction,
ignition
malfunction,
valves stuck, etc.
Date Purchased: ______ / ______ / ______
Engine type: ___ ___ ___ ___
Engine serial number: __ __ __ __ __ __ __ __ __ __ __
Recharge battery.
Replace fuse.
(p. 12).
Move choke lever
to CLOSED
position unless the
engine is warm.
Turn engine switch
to ON position.
Fill with the
recommended oil
to the proper level
(p. 8
9).
Refuel (p. 7).
Drain fuel tank and
carburetor (p. 14).
Refuel with fresh
gasoline (p. 7).
Gap or replace
spark plug (p. 11).
Dry and reinstall
spark plug. Start
engine with
throttle lever in
MAX. position.
Replace or repair
faulty components
as necessary.
Clean or replace
filter element(s)
(p. 9
10).
Drain fuel tank and
carburetor (p. 14).
Refuel with fresh
gasoline (p. 7).
Replace or repair
faulty components
as necessary.
1.
2.
3.
4.
5.
1.
2.
3.
6.
07/06/21 11:47:07 32Z3S600_015