manualshive.com logo in svg

Honda HRX217HYUA, Owner'S Manual, Page: 9 / 24

Share
Download
Honda HRX217HYUA Owner'S Manual Download Page 9

9

Shift Lever

Use the shift lever to select 
the forward speed at which 
you wish to mow.

Do not use the throttle lever 
to adjust your forward speed. 
The throttle lever must 
remain in the FAST position 
for good mowing 
performance.

The position of the shift lever 
determines the maximum 
ground speed when the drive 
clutch lever is fully engaged.

For maximum mowing
performance, use the lower
speed range for mowing and the higher speed range for transporting.

With the shift lever all the way back and the drive clutch lever
engaged, the mower will move slowly or not at all.

Starting the Engine

Before starting the engine, always release the drive control lever so
that the mower will not move forward when you operate the starter.

1. Turn the fuel valve to the ON position (

page 3

).

2. Move the throttle lever to the 

FAST position.

3. Pull the starter grip lightly

until you feel resistance, then
pull briskly. Return the starter
grip gently.

To ensure easy restarting and 
maximum performance from the 
Auto Choke System, allow the 
engine to run for at least three 
minutes after starting a cold 
engine before shutting down. 
This minimum run time will be longer if the temperature is below 21°C.

Stopping the Engine

1. Release the drive clutch and blade control levers.

2. Move the throttle lever to the STOP position.

3. If your mower will not be used for 3 to 4 weeks, we recommend

running the engine’s carburetor out of fuel. You can do this by
leaving the fuel valve OFF, restarting the engine and running it until
it stops. See “AVOIDING FUEL-RELATED PROBLEMS” on

page 17

 if you don’t plan to use your mower for a month or more.

4. Clean your mower after each mowing; refer to “Cleaning” on

page 14

.

SERVICING YOUR MOWER

Proper maintenance is essential for safe, economical, and
trouble-free operation. It also helps reduce air pollution.

To help you properly care for your mower, the following pages include 
a maintenance schedule, routine inspection procedures, and simple 
maintenance procedures using basic hand tools. Other service tasks 
that are more difficult or require special tools are best handled by 
professionals and are normally performed by a Honda technician or 
other qualified mechanic.

The maintenance schedule applies to normal operating conditions. If
you operate your mower under severe conditions, such as sustained
high load, high temperature, or unusually wet or dusty conditions,
consult your servicing dealer for recommendations applicable to your
individual needs and use.

Remember that an authorised Honda servicing dealer knows your
mower best and is fully equipped to maintain and repair it. To ensure
the best quality and reliability, use only new, Honda Genuine parts or
their equivalents for repair and replacement.

Maintenance Safety

Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.

Safety Precautions

 • Make sure the engine is off before you begin any maintenance or

repairs. This will eliminate several potential hazards:
–

Carbon monoxide poisoning from engine exhaust.

Be sure there is adequate ventilation whenever you operate
the engine.

–

Burns from hot parts.

Let the engine and exhaust system cool before touching.

–

Injury from moving parts.

Do not run the engine unless instructed to do so.

 • Read the instructions before you begin, and make sure you have

the tools and skills required.

 • To reduce the possibility of fire or explosion, be careful when

working around petrol. Use only a nonflammable solvent, not
petrol, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.

THROTTLE

SHIFT 
LEVER 

SLOW

FAST

ST

OP

FAST

THROTTLE 
LEVER

 WARNING

Improper maintenance, or failure to correct a problem 
before operation, can cause a malfunction in which you 
can be seriously hurt or killed.

Always follow the inspection and maintenance 
recommendations and schedules in this owner’s manual.

 WARNING

Failure to properly follow maintenance instructions and 
precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this 
manual.

Summary of Contents for HRX217HYUA

























Reviews:

No comments