background image

21

EMISSION CONTROL SYSTEM WARRANTY

Your new Honda Power Equipment engine complies with the U.S. EPA, 
Environment Canada, and State of California emission regulations (models 
certified for sale in California only). American Honda Motor Co., Inc. provides 
the emission warranty coverage for engines in the United States and its 
territories. Honda Canada Inc. provides the emission warranty for engines in 
the 13 provinces and territories of Canada. In the remainder of this Emission 
Control System Warranty, American Honda Motor Company Inc. and Honda 
Canada Inc. will be referred to as Honda.

YOUR WARRANTY RIGHTS AND OBLIGATIONS:

CALIFORNIA 

The California Air Resources Board and Honda are pleased to explain the 
emission control system warranty on your Honda Power Equipment engine. In 
California, new spark-ignited small off-road equipment engines must be 
designed, built, and equipped to meet the State's stringent anti-smog 
standards.

OTHER STATES, U.S. TERRITORIES, AND CANADA

In other areas of the United States and in Canada, your engine must be 
designed, built, and equipped to meet the U.S. EPA and Environment Canada 
emission standards for spark-ignited engines at or below 19 kilowatts. Specific 
Honda products that do not meet the California emissions regulations can be 
identified by a “Not for sale in California” decal.

ALL OF THE UNITED STATES AND CANADA

Honda must warrant the emission control system on your power equipment 
engine for the period of time listed below, provided there has been no abuse, 
neglect, or improper maintenance of your power equipment engine. Where a 
warrantable condition exists, Honda will repair your power equipment engine at 
no cost to you including diagnosis, parts, and labor.

Your emission control system may include such parts as the carburetor or fuel 
injection system, the ignition system, and catalytic converter. Also included 
may be hoses, connectors, and other emission-related assemblies. (See 
adjacent table for additional covered parts).

OWNER'S WARRANTY RESPONSIBILITY: 

As the power equipment engine owner, you are responsible for the performance 
of the required maintenance listed in your owner's manual. Honda recommends 
that you retain all receipts covering maintenance on your power equipment 
engine, but Honda cannot deny warranty coverage solely for the lack of receipts 
or for your failure to ensure the performance of all scheduled maintenance.

As the power equipment engine owner, you should however be aware Honda 
may deny you warranty coverage if your power equipment engine or a part has 
failed due to abuse, neglect, improper maintenance, or unapproved 
modifications.

You are responsible for presenting your power equipment engine to a Honda 
Power Equipment dealer as soon as a problem exists. The warranty repairs 
should be completed in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your emissions warranty rights and 
responsibilities, you should contact the Honda Office in your region

:

WARRANTY COVERAGE: 

Honda power equipment engines sold in the United States and Canada are 
covered by this warranty for a period of two years from the date of delivery to 
the original retail purchaser or the length of the Honda Distributor’s Limited 
Warranty, whichever is longer. This warranty is transferable to each subsequent 
purchaser for the duration of the warranty period.

If any emission-related part on your engine is defective, the part will be repaired 
or replaced by Honda without charge for diagnosis, parts, or labor. All defective 
parts replaced under this warranty become the property of Honda. A list of 
warranted parts is in the adjacent column. Normal maintenance items, such as 
spark plugs and filters, that are on the warranted parts list are warranted up to 
their required replacement interval only.

Honda will also replace other engine components damaged by a failure of any 
warranted part during the warranty period. 

Only Honda approved replacement parts may be used in the performance of 
any warranty repairs and must be provided without charge to the owner. The 
use of replacement parts not equivalent to the original parts may impair the 
effectiveness of your engine emission control system. If such a replacement 
part is used in the repair or maintenance of your engine, and an authorized 
Honda dealer determines it is defective or causes a failure of a warranted part, 
your claim for repair of your engine may be denied. If the part in question is not 
related to the reason your engine requires repair, your claim will not be denied.

TO OBTAIN WARRANTY SERVICE: 

You must, at your own expense, take your Honda Power Equipment engine or 
the product on which it is installed, along with your sales registration card or 
other proof of original purchase date, to any Honda Power Equipment dealer 
who is authorized by Honda to sell and service that Honda product during his 
normal business hours. Claims for repair or adjustment found to be caused 
solely by defects in material or workmanship will not be denied because the 
engine was not properly maintained and used.

If you are unable to obtain emission warranty service or are dissatisfied with 
the warranty service you received, contact the owner of the dealership 
involved. Normally this should resolve your problem. However, if you require 
further assistance, contact the Honda office in your region. Refer to adjacent 
column for contact information.

EXCLUSIONS: 

Failures other than those resulting from defects in material or workmanship are 
not covered by this warranty. This warranty does not extend to emission control 
systems or parts that are affected or damaged by owner abuse, neglect, 
improper maintenance, misuse, misfueling, improper storage, collision, the 
incorporation of, or use of, unsuitable attachments, or the unauthorized 
alteration of any part.
This warranty does not cover replacement of expendable maintenance items 
made in connection with required maintenance service after the item’s first 
scheduled replacement as listed in the maintenance section of the product 
Owner’s Manual, such as: spark plugs and filters.

DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITATION 
OF IMPLIED WARRANTIES: 

American Honda Motor Co., Inc. and Honda Canada disclaim any 
responsibility for incidental or consequential damages such as loss of time or 
the use of the power equipment, or any commercial loss due to the failure of 
the equipment; and any implied warranties are limited to the duration of this 
written warranty. This warranty is applicable only where the California, U.S. 
EPA or Environment Canada emission control system warranty regulation is in 
effect.

EMISSION CONTROL SYSTEM WARRANTY PARTS:

American Honda Motor Co., Inc.

Power Equipment Customer 

Relations 

4900 Marconi Drive

Alpharetta, Georgia 30005-8847

Telephone: (888) 888-3139

or

Honda Canada Inc.

Power Equipment Customer 

Relations

Visit www.honda.ca for 

contact information

Telephone: (888) 946-6329

Email: powerequipmentemissions

@ahm.honda.com

SYSTEMS COVERED

BY THIS WARRANTY:

PARTS

DESCRIPTION:

Fuel Metering

Carburetor assembly, (includes starting enrichment 

system), Engine temperature sensor, Engine control 

module, Fuel regulator, Intake manifold

Evaporative

Fuel tank, Fuel cap, Fuel hoses, Vapor hoses, 

Carbon canister, Canister mounting brackets, 

Fuel strainer, Fuel cock, Fuel pump, Fuel hose joint, 

Canister purge hose joint

Exhaust

Catalyst, Exhaust manifold

Air Induction

Air filter housing, Air filter element*

Ignition

Flywheel magneto, Ignition pulse generator, 

Crankshaft position sensor, Power coil, Ignition coil 

assembly, Ignition control module, Spark plug cap, 

Spark plug*

Crankcase Emission 
Control

Crankcase breather tube, Oil filler cap

Miscellaneous Parts

Tubing, fittings, seals, gaskets, and clamps 

associated with these listed systems.

Note: This list applies to parts supplied by Honda and does not cover parts 

supplied by the equipment manufacturer. Please see the original 
equipment manufacturer’s emissions warranty for non-Honda parts.

* Covered up to the first required replacement only. See the 

MAINTENANCE 

SCHEDULE

 on 

page 9

.

PWL50975-M

Summary of Contents for HRR216VYA

























Reviews: