Honda GXE2.0H, Manual

Page: 60 / 71

7-2
dummyhead dummyhead
POWER UNIT
POWER UNIT
BATTERY PACK REMOVAL/
INSTALLATION
NOTICE : Do not handle the battery with wet hands or in wet or rainy
conditions.
NOTE: Always clean the battery attaching area and battery connector, and
be sure that there is no foreign material on the contacts or in the connector.
REMOVAL
Disconnect the battery connector [1] of the power cable from the battery
pack [2].
Pull the fastener lever [3] toward you to release the lever pin [4] and then
remove the battery pack.
INSTALLATION
Insert the claw [5] of the battery pack into the battery hook [6] securely and
set it onto the tray.
Hook the lever pin and turn the fastener lever over the battery pack to
secure it. Connect the battery connector.
After installation, make sure the battery pack is securely attached on the
tray.
[1]
[2]
[3]
[4]
[5]
[6]