Honda GXE2.0H, Manual

Page: 53 / 71

6-5
dummyhead dummyhead
CONTROL UNIT
PDU REMOVAL/INSTALLATION
Remove the following covers (page 5-2).
– PDU cover
– Front cover
– Rear cover
NOTE: Before removing the PDU from the stay, check whether the components of the vibration damping structure are normal (page
6-8).
NOTICE :
Do not apply excessive force to the mount rubbers supported PDU during servicing.
PDU/STAY ASSEMBLY
[1]
[4]
[6]
[7]
[3]
[5]
[2]
27 N·m (2.8 kgf·m, 20 lbf·ft)
Parts Remarks
[1] 33P (Black) CONNECTOR
[2] 3P (Gray) CONNECTOR
[3] 3P (Black) CONNECTOR
[4] BOLT (6 x 10 mm) (2)
[5] HARNESS BRACKET B
[6] SPECIAL COLLAR (4)
[7] PDU/STAY ASSEMBLY REMOVAL: Pull on the stay part gradually by prying the stay at each stud bolt part
evenly. Do not hold the PDU.
INSTALLATION: Check the stay clearance (page 6-7).