Honda GXE2.0H, Manual

Page: 48 / 71

5-6
dummyhead dummyhead
COVER
FRAME MOUNT RUBBER CHECK
Check the mount rubbers [1] for looseness by lifting the battery tray lightly at
points of the four corners. The tray should have very little movement if the
mount rubbers are not damaged.
If any looseness to noted, they may be damaged, and replace the mount
rubbers and stopper rubber [2] as a set.
BATTERY FASTENING COMPONENT
CHECK
[1] BATTERY MOUNT RUBBERS
Check each rubber for damage and measure the rubber height.
If the rubber is severely damaged or the height is excessively lower than the
standard value, replace them as a set.
[2] BATTERY HOOK
Looking at the fastener wire from the side (as shown), check to see whether
the hook shape is bent in the direction of the arrows.
If there is any distortion, repair or replace it.
[3] FASTENER WIRE
Looking at the fastener wire from the side (as shown), check to see if the
wire is correctly bent into a curve with the indicated measurements.
If the length is longer, the wire has straightened out and requires replacing.
[1]
[2]
[1]
5 mm (0.2 in)
[2]
74 mm (2.9 in)
[3]