Engine Oil
u
Changing Engine Oil & Filter
172
Ma
in
te
na
nce
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
vehicle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
Check the engine oil with the Idling Stop
system disabled.
1.
If the engine is cold, idle the engine for
3 to 5 minutes.
2.
Turn the ignition switch to
(Off) and
wait for 2 to 3 minutes.
3.
Place your vehicle on a firm, level
surface.
4.
Place a drain pan under
the drain bolt A, drain bolt B, drain bolt
C and engine oil filter.
Place a drain pan under the
drain bolt and engine oil filter.
5.
Remove the oil fill cap,
drain bolt A, drain bolt B, drain bolt C
and sealing washers to drain the oil.
Remove the oil fill cap, drain
bolt and sealing washer to drain the oil.
NOTICE
Using the wrong oil filter can result in serious damage
to the engine.
GL1800BD/DA
GL1800BD/DA
GL1800/B
GL1800BD/DA
GL1800/B
Oil fill cap
Drain bolt A/
sealing washer
Drain bolt B/
sealing washer
Drain bolt C/sealing washer
GL1800BD/DA
Drain bolt/sealing washer
GL1800/B
20 GL1800 32MKC820.book 172 ページ 2019年9月20日 金曜日 午後3時9分
Summary of Contents for GL1800 2020
