Servicing Your Honda
123
Rear Fender Cover Removal
Refer to
Safety Precautions
on page 111.
The rear fender cover must be removed for the battery and fuse
maintenance and to access the owner’s manual, air pressure gauge,
40 A spare fuse and fuse puller.
Removal
1. Remove the seat (page 122).
2. Unhook the rubber strap (1).
3. Firmly pull the studs (2) from the grommets (3).
4. Slide the rear fender cover (4) forward to disengage the tabs (5).
5. Remove the rear fender cover.
Installation
Install the rear fender cover in the reverse order of removal.
(1) rubber strap
(2) studs
(3) grommets
(4) rear fender cover
(5) tabs
(5)
(4)
(2)
(1)
(3)
20 TRX520FM6-31HR56500.book 123 ページ 2019年4月2日 火曜日 午後4時8分
Summary of Contents for FourTrax Foreman Rubicon TRX520FM6 2020
