Honda FIT 2014, Online Reference Owner'S Manual, Page: 214 / 289

213
uu
Replacing Light Bulbs
u
Front Turn Signal Light Bulbs
Mai
ntenan
ce
5. Reinstall the hold-down wire. Hook the end
of the wire on the knob in the slot.
u
You can see if the hold-down wire is in
the right place from the inspection
window.
6. Reinstall the rubber weather seal.
7. Insert the coupler into the connector of the
bulb.
Front Turn Signal Light Bulbs
When replacing, use the following bulbs.
1. Turn the socket to the left and remove it.
2. Push in the old bulb, rotate to the left until
it unlocks, and remove.
3. Insert a new bulb.
Hold-Down Wire
Inspection Window
Front Turn Signal Light: 21 W (Amber)
Bulb Socket
Main Menu
Table of Contents