12
PRE-OPERATION CHECK
4.
Place the tiller on a firm level surface and hold the tiller level (i.e. with
the rotary tines and rear wheels set on the ground). Stop the engine
before starting service of the tiller. Servicing the tiller on an unstable
surface of the ground or without stopping the engine can cause injury
and/or equipment damage.
Tiller outside
Control lever function
Wiring and cables
Engine operation
1.
2.
3.
4.
Daily inspection and service of tiller is essential for safe and reliable
operation. Perform the following check before operation.
Aren’t the fuel and engine oil leaking?
Isn’t there any flammable material (dust, straw, etc.) around the
engine?
Does the lever operate smoothly?
Is there the specified amount of free play at the tip of the lever (page
through
)?
Isn’t the insulation of each wire and cable torn or cut?
Is there any wire or cable pinched by the neighboring parts?
Start the engine. Is there any abnormal sound from the engine?(See
pages
through
for starting procedure.)
Does the engine stop securely by operating the engine switch?(See
pages
and
for stopping procedure.)
If you notice any other abnormal symptoms, consult with your
authorized Honda dealer promptly.
19
21
43
45
32
33
08/08/06 08:10:12 32V19600_014