Honda EU3000i Handi, Manual

Page: 17 / 194

SERVICE INFORMATION
2-4
(*2): Apply oil to the threads and seating surface of the nut flange.
STANDARD TORQUE VALUES
LUBRICATION & SEAL POINT
Engine switch base screw M5 (Screw) 1.4 0.14 1
Engine switch knob screw M5 x 0.8 2.3 0.23 1.7
Cock cable nut M5 4.7 0.5 3.6
Control panel bolt M6 x 1.0 9.3 0.95 6.9
Inverter bolt M6 x 1.0 9.3 0.95 6.9
Fuel tank bracket bolt M6 x 1.0 9 0.9 6.5
Fuel cock bolt M6 x 1.0 9 0.9 6.5
Cock cable screw M4 x 0.7 2.3 0.23 1.7
Indicator harness clamp screw M5 (Screw) 1.2 0.12 0.9
Indicator assy screw M5 (Screw) 1.2 0.12 0.9
Carry grip socket bolt M6 x 1.0 9 0.9 6.5
Carry handle socket bolt M6 x 1.0 9 0.9 6.5
Rear carry grip socket bolt M6 x 1.0 9 0.9 6.5
Handle holder shaft nut M6 x 1.0 8.3 0.85 6.1
Item Thread dia. (mm)
Torque values
N·m kgf·m lbf·ft
Item Thread dia. (mm)
Torque values
N·m kgf·m lbf·ft
Screw 3 mm 1 0.1 0.7
4 mm 2 0.2 1.5
5 mm 4 0.4 2.9
6 mm 9 0.9 6.6
Bolt and nut 5 mm 5 0.5 3.6
6 mm 10 1.0 7
8 mm 22 2.2 16
10 mm 34 3.5 25
12 mm 54 5.5 40
Flange bolt and nut 4 mm 3.4 0.35 2.5
5 mm 5 0.5 3.6
6 mm 11 1.1 8
8 mm 26 2.7 20
10 mm 39 4.0 29
SH (Small head) flange bolt 6 mm 9 0.9 6.6
CT (Cutting threads) flange bolt (Retightening) 5 mm 5.4 0.55 4.0
6 mm 10 1.0 7
Location Material Remarks
Crank pin and gears Engine oil
Piston outer surface
Piston rings
Piston pin outer surface
Cylinder barrel inner surface
Connecting rod big and small end
Connecting rod bolt threads and seating surface
Camshaft cam profile and journal
Valve lifter stem, stem end and slipper
Valve stem sliding surface and stem end
Valve rocker arm tappet surface and pivot
Rocker arm pivot threads and pivot
Rotor nut threads and seating surface
Cylinder head bolt threads and seating surface
Oil seal lip
Daphne Eponex No.2 or
equivalent
O–ring
Cock cable holder pivot
Shin–Etsu High temperature
grease G40 or equivalent