
39
OPERATION
3. Connect the red lead of the battery charging cable to the positive (+)
battery terminal and the black lead to the negative (–) battery
terminal.
4. Start the generator (see page 25).
Do not start the vehicle while the battery charging cable is connected
and the generator is running. The vehicle or the generator may be
damaged.
An overloaded DC circuit, excessive current draw by the battery, or a
wiring problem will trip the DC circuit protector (PUSH button extends
out). If this happens, wait a few minutes before pushing in the circuit
protector to resume operation. If the DC circuit protector continues to
go OFF, discontinue charging and see your authorized Honda
generator dealer. The circuit protector does not prevent overcharging
the battery.
BATTERY CHARGING CABLE
(Optional equipment)
BLACK LEAD
RED LEAD
DC CIRCUIT
PROTECTOR
PUSH
OFF
ON
YELLOW INDICATOR
DC RECEPTACLE
31Z446020.book 39 ページ 2019年2月8日 金曜日 午前9時37分