Honda EU10iT1, Manual

Page: 52 / 138

5-5
dummyhead dummyhead
COVER
L. SIDE COVER DISASSEMBLY/
ASSEMBLY
Remove the L. side cover (page 5-3).
• When installing, route the wire properly (page 2-8).
ENGINE STOP SWITCH
SELF-TAPPING SCREW (3 x 16 mm)
0.18 N·m (0.018 kgf·m, 0.1 lbf·ft)
SELF-TAPPING SCREW (5 x 20 mm) (2)
0.8 N·m (0.08 kgf·m, 0.6 lbf·ft)
Do not remove the valve
unless it is replaced.
SELF-TAPPING SCREW (5 x 20 mm)
1.4 N·m (0.14 kgf·m, 1.0 lbf·ft)
ENGINE STOP SWITCH PLATE
L. SIDE COVER
SCREW (4 x 19 mm)
ENGINE SWITCH KNOB
INSPECTION: page 11-4
FUEL VALVE
FUEL PUMP
WASHER (5 mm) (2)
INSPECTION: page 3-8
FUEL TUBE
(TANK TO PUMP)
INSPECTION: page 3-8
Do not remove the pump unless it is replaced.
Replace the fuel pump if foreign material or
water has accumulated in the tank.
FUEL TUBE
(TANK TO VALVE)
TUBE
CLIP (B8)
TUBE
CLIP (C9)
TUBE CLIP
(B8)
TUBE CLIP (C11)
SELF-TAPPING SCREW (5 x 20 mm) (2)
0.8 N·m (0.08 kgf·m, 0.6 lbf·ft)
SELF-TAPPING SCREW
(3 x 10 mm)
0.18 N·m (0.018 kgf·m,
0.1 lbf·ft)