STORAGE
80
4. After all the gasoline has drained into the container, tighten the drain screw
securely.
5. Place a suitable gasoline container below the sediment cup, and use a funnel
to avoid spilling gasoline.
6. Remove the sediment cup (see page 71), and then turn the fuel valve lever to
the ON position.
7. Allow the gasoline to drain completely, and then install the sediment cup and
a new O-ring (see page 71).
Engine Oil
Change the engine oil (see page 66).
Engine Cylinder
1. Remove the spark plug, and pour a teaspoon (5 cc) of clean engine oil into
the cylinder. Crank the engine several revolutions to distribute the oil, then
reinstall the spark plug.
2. Slowly pull the starter grip until resistance is felt. At this point, the piston is
coming up on its compression stroke, and both the intake and exhaust valves
are closed. Storing the engine in this position will help to protect it from
internal corrosion.
Battery
Charge the battery before storing the generator (see page 74).
FUEL VALVE LEVER
ON
31Z236200.book 80 ページ ２０２０年２月２０日 木曜日 午後１時８分
Summary of Contents for EM5000SX
Page 120: ...118 MEMO 31Z236200 book 118...
Page 121: ...119 MEMO 31Z236200 book 119...
Page 122: ...120 MEMO 31Z236200 book 120...
