Honda Element 2004 Owner'S Manual Download Page 18 | Manualshive

Page: 18 / 219

Honda Element 2004 Owner'S Manual Download Page 18

WWW.MANUALS.WS

WWW.MANUALS.WS

Your vehicle has a Supplemental
Restraint System (SRS) with front
airbags to help protect the heads and
chests of the driver and a front seat
passenger during a moderate to
severe frontal collision (see page

for more information on how

your front airbags work).

The most important things you need
to know about your airbags are:

Your vehicle also has side airbags to
help protect the upper torso of the
driver or a front seat passenger
during a moderate to severe side
impact (see page

for more

information on how your side airbags
work).

They are designed to supplement
the seat belts.

To do

their job, airbags must inflate with
tremendous force. So while
airbags help save lives, they can
cause minor injuries or more
serious or even fatal injuries if
occupants are not properly
restrained or sitting properly.

Always wear your seat belt properly,
sit upright, and as far back from the
steering wheel while allowing full
control of the vehicle. A front
passenger should move their seat as
far back from the dashboard as
possible.

22

25

Optional on EX models

Your Vehicle’s Safety Features

Driver and Passenger Saf ety

Airbags

Airbags do not replace seat belts.

Airbags of f er no protection in rear
impacts, rollovers, or minor
f rontal or side collisions.
Airbags can pose hazards.

What You Should Do:

10

０３／１０／２２１７：５５：３７３１ＳＣＶ６１０００１５

«
...
16
17
18
19
20
...
»

Summary of Contents for Element 2004




























































































































































































































Reviews:

No comments